1 / 10
HGX volcano toolhead for Tiny-M
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HGX volcano toolhead for Tiny-M
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 445
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
A remix of https://github.com/Outrider305/Tiny-M_SSB_1010
Two years ago i decided to do a remix it because i liked the design. The original repo contained a few issues and also the part list was partially incorrect.
Note: When upgrading from the original printhead, the Z axis should be raised by 8mm, make sure your setup allows this.
I have been using this printhead for over two years with great success.
Parts list:
- HGX extruder
- V6DM heatsink
- V6 throat
- Volcano heatblock
- Microswitch MS-1A-13.5 (The same as original Tiny-M)
- 1x 3010 hotend cooling fan
- 2x 3010 blower fan (part cooling)
- 8x 6x3mm magnet
- 2x M3x45mm screws
- 6x M3x4mm threaded insert (OD 5mm)
- 2x M3x10mm
- 2x M3x6mm (Hex Socket Cap)
- 4x M2.5x16mm
