Honda H22 VSS bracket for Civic ED/EF cable driven cluster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket is used to convert the H22 Vehicle speed sensor to accepte the cable driven system from a Civic ED/EF.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is designed for a mechanical cable with a slight press fit and a notch to retain the original rubber dust shield.
The cable is secured using a cotter pin, which locks behind an inset in the OE cable.
To use the bracket:
Remove the electronic portion of the H22 VSS, slip on the printed part, and use the same bolts to secure it in place. Align the inner cable with the notched hole, press in the sleeve, and secure the sleeve with a single cotter pin.
I mounted this part to a Honda H22 engine in a Civic ED6. It may work with other engine and chassis combos, but I haven't tested them.
For best results, print with a high-temp rated filament—I used PETG—and at 100% infill for strength.