Meta Magnum from The Citadel

A artistic interpretation of the Citadel's Meta Magnum. With a small rubber band the trigger will drop the hammer as shown in the video. This is not a 1:1 replica of the in-game asset as that has like 30 pixels to work with.

Features:

• Full rifled barrel appropriate for the .44 magnum the game says its chambered in
• Manually moving bolt
• Trigger and hammer move
• Dummy .44 magnum round can be chambered by hand
• 2 Part display stand

Non printed parts:

• 1 small rubber band for the trigger/hammer
• 2 M3 nuts
• 2 M3x20 screws

Fiddly assembly parts:

• If installing a rubber band, loop it around the peg inside the frame first, then install the hammer and stretch it past the hammer, install the trigger, loop the rubber band back across to the peg in the frame, install the side plate to the frame,
• Exractor claw is mostly cosmetic so can be skipped if so desired
• For best results, print the barrel fully upright and use supports
• Install the barrel last, the receiver slides over the frame and bolt if you try installing the barrel before doing that you will have a bad time.

Fun facts: 
- To make this semi plausible the Marlin 1881 was used as reference for the receiver and bolt
- Un upgraded this holds 6 rounds in game, based on the dimensions this model was made to it would hold 4 in an under-barrel tube magazine and 1 in the chamber, were it a real firearm
- Made in blender because I hate myself

Category: Mechanical Toys