dummy 13 mahoraga head
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
WARNING this is a pretty tricky print for .4 mm nozzle and the inexperienced read desc. For some tips
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 249
- Wydruki
- 0
- Wyświetlenia
- 1210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- GNU General Public License v2.0
credits to: https://www.printables.com/@YurFreakypal_2619977/models
@YurFreakypal_2619977 did help come up with the idea but otherwise I did all the modeling
The best changes that I made that helped were:
1. be light and simple with the supports on the wings. tree or normal (idk what it call it just not tree or organic) does not have that big of a difference tho it really depends on your slicer
2. the wheel is a little better with good bed adhesion and don’t expect the balls to print the best and z hop is very useful on the first layer
3. 0.2 mm nozzle should really only be necessary on the head mainly the wings but should not change much