Qidi Plus4 Toolhead Carriage for Xmax3 Hotends
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Xmax3 are almost the same size as the Plus 4 hotend, but about 4 mm shorter. this solves that.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 639
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I had heard that the Xmax3 are the same size as the Plus4 and are swappable (with some changes to the plug) (reports are the q1pro hotends are the same length as the plus4)
Later on I heard that it is 4mm short.
So I Stewy helped me with the original toolhead carriage file, and I modded it to fix the issues with the size differences for those that have a bunch of extra xmax3/q1pro nozzles and want to use them on the plus4. Stewy informed me that this is for the first generation Plus4 toolhead carriages and it may have some differences to newer models (I have a first gen so I do not know what those are), but of course step files are provided so you can make adjustments to your needs.
The photo shows the differences and the different screw hole diameters specifically for heatset inserts of m3 sizes.
I do not have this mod, so my knowledge is limited on how it will work, but just wanted to help out the community.