NFT downspout elbow Cap with Threads
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NFT downspout elbow Cap with Threads
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
So i have been making some NFT Hydroponics and was looking for a way to drain the NFT in a closed loop system without the water pooling up. So i decided I would buy a downspout elbow and then add this cover with a threaded end so I can add a hose back to the reservoir system.
I could not get the threads perfect but its close enough that the Apollo ½ "Barbs fit to the edge.
I printed with 15% infil and the water started seeping through! so i printed the next batch at 100% and shrank the thickness down to only 8 layers.
I printed this with PETG with a .6 nozzle.