Ubiquiti Unifi Power Brick / PSU Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple wall mount for a UniFi power brick / PSU. For a brick that's 75x75x30 mm
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 308
- Wydruki
- 3
- Wyświetlenia
- 920
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
Simple wall mount for a UniFi power brick / PSU. For a brick that's 75x75x30 mm. Inspired by the linked remix mount, but wanted to add a through-hole so you can mount the brick in any orientation, including with the big cable through the bottom.
I printed it on a Bambulab A1 Mini with PLA and a 0.2mm nozzle. Added auto-generated tree supports for the screw holes.
Note: The picture of the printed model was mk1 which had the screw holes too close together, the uploaded model placed them further apart for more stability.
One of my first CAD projects, source is freely available here: