1 / 2
Prusa Advanced Filtration System Mod for enXLosure — zdjęcie 1
1 / 2

Prusa Advanced Filtration System Mod for enXLosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This mod allows you to print a new shroud mounting the fan and filter on the outside of the plexiglass.

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
321
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

I printed this using my XL and used PLA as support for the PETG. It separated beautifully and made the print a breeze. After printing, use some tpu filament as a gasket. I put some CA glue in the corners and pressed the TPU into place while it dried. 

Tagi