ShakeSort! - Bolt and Fixings Organiser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple shake-to-sort bolt organizer for M5–M2 threads—print, stack, shake, and declutter your hardware!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
ShakeSort is a simple, effective bolt sorting system that separates metric bolts (M5 to M2) by thread size using gravity and vibration. Stack the trays from largest diameter to smallest, pour in your bolt mix, attach the lid, hold tight and shake—the trays will handle the rest.
I originally designed this for my own use after knocking a few thousand bolts across my workshop… not once, but twice…. Anyway, the design works pretty well! So I’m posting it here for others to print and enjoy.
If you'd like to buy one already printed, support me on Etsy
🔍 Designed for:
- M5, M4, M3, and M2 bolts (Socket Cap and Posidrive Bolts work the best! others may work but your mileage may vary)
- FDM 3D printers (no supports needed)
- Makers who love tidy hardware drawers
Tips for printing:
- Use Supports on everything other than the Lid (for Obvious Reasons)
- Try to use at least 2 walls and I've found 20% adaptive cubic infill works well
- use a 0.4mm Nozzle and 0.2mm Layer height
That's all for now!
💡 Print, stack, and shake. That’s it.
Happy Printing!