1 / 2
3D Printed 3018 CNC Spindle Holder for Wood Router
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This uses 8mm linear platforms and the parts that came with the cnc to basically upgrade the underpowered 3018 cnc.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 2083
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 5)Remiksy (0)Kolekcje (22)Powiązane
- Get your hands on a wood trimmer. Any 65mm wood trimmer will work. I got a cheap one for $30 and it works fine.
- Print the device with relatively high infill.
- Attach your 8mm linear platforms. They should bolt right on.
- Attach the linear nut. It should thread right on with long m3 bolts. Longer the bolts the better.
- Wrap rubber bands around the wood trimmer to help it stay on the device.
- Use m3 screws to hold the wood trimmer in place.