Original Prusa Enclosure Hinged Lid Handle Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This hanger can be attached to the handle to hold the Original Prusa Enclosure's hinged lid in an elevated position.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This hanger can be attached to the handle to hold the Original Prusa Enclosure's hinged lid in an elevated position when you need access but can't raise the lid enough for it to rest on the back hinges.
You can attach the hanger in basically any way you want, but in my setup:
- I created a model to add a top handle/loop to my (Un)original Dry Box.
- Used some thin rope and created two loops with some heat shrink tubing.
- Used this s-clip model to connect the rope to each handle.
The hanger can sit on the Dry Box handle when not used.
MAKERS: Please post a picture with comments here of any prints/makes you do from this model so that I can see how people are using it and whether you are finding success with it. Thanks!



