1 / 4
Small spool for 30 meters of filament.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small spool for leftover filament. Everyone should have one. My own model, 3 mm thick walls, reusable and convenient.
- Ocena
- 4 / 5
- Polubienia
- 10
- Pobrania
- 67
- Wydruki
- 1
- Wyświetlenia
- 186
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (11)Powiązane
This is a small spool designed for small amounts of filament. Everyone should have one because leftover filament is common. This is my own model, and I hope you find it very convenient. The walls are 3 millimeters thick, and you can use it as much as you want.
To use, slide both parts together. Both parts have a deviation of 0.2 millimeters. With some printers, it is essential to trim a few edges. If it does not stay in place, you can apply a little superglue to the guides.