1 / 1
V2! E18 Magazine better sliding and better bullet grip(included tolerance) — zdjęcie 1

V2! E18 Magazine better sliding and better bullet grip(included tolerance)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Whenever I used to print the magazine, even with -0.1 compensation, it wouldn't slide properly. I also fixed the bullet.

Ocena
1 / 5
Polubienia
6
Pobrania
67
Wydruki
1
Wyświetlenia
361
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I have added a better sliding mechanism for the magazine, and I have also extended the bullet grip part(check photos) so that the bullets wouldn't randomly blast out of the magazine.

DO NOT SET COMPENSATION!!! INCLUDED TOLERANCES

I have noticed that when you set compensation because of the holes on the sides, the model would have weird lines on the side. I have included tolerance, so yeah.

Tagi