Buffer for Salvo Precision MCX Airsoft GBBR Rifle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Buffer pad replacement for Salvo MCX/SCX.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
This model is a 1:1 for my fellow printing and Salvo enjoyers.
While the buffer piece for the Salvo MCX is indeed subject to wear from impacts, I don't believe you should rush out to buy an expensive replacement.
Instead, you can buy rubber pieces and pads of various hardnesses at any hardware store. Or simply 3D-print one!
Enjoy your Salvo, and let the community know what configuration works best for you.
----
UPDATE
A taller version has been added. It maintains a decent contact surface and the 13 mm height should fit despite the seemingly large variance in receiver tolerances.
Longer/taller buffers WILL NOT completely prevent over compression of the springs, but may help reduce it.
The best practice is to print your buffer in TPU or another material that will help absorb impact, and/or source a set of stiffer springs. The latter will make significantly more difference.
----
Print settings and material suggestions
PETG or ABS with a 75%+ infill for a strong and rigid buffer pad.
TPU with a 50%+ infill for a squishier and more dampening buffer pad.
I used .16 layer height for test prints, but adjust this to your liking and needs.