1 / 4
Silica-Gel Container with Centering and Holding Wings to use while printing — zdjęcie 1
1 / 4

Silica-Gel Container with Centering and Holding Wings to use while printing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Silica container with wings that hold and centers the container in spools with larger inner diameter.

Ocena
0 / 5
Polubienia
5
Pobrania
30
Wydruki
0
Wyświetlenia
183
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

With larger diameter spools, the container easily falls out of the rotating spool. Especially if you use a container like the IKEA 365+ as a double spool holder, this silica gel container helps to prevent it from falling out and blocking the rotation.

Use PETG or other filament that allows the wings to deform without breaking.

Print Note: 6 perimeters; set top and bottom layer to zero. Infill to 35% or 40% rectangular pattern to create a grid in the top and bottom.

_________________________

Bei größeren Durchmessern der Spulen fällt der Behälter leicht aus der sich drehenden Spule heraus. Besonders wenn Sie einen Behälter wie den IKEA 365+ als Doppelspulenhalter verwenden, hilft es, dieser Silicagel Container zu vermeiden, dass das Herausfallen eine Blockierung der Drehung verursacht.

Mit PETG oder anderem Filament drucken, das eine Verformung der Flügel ohne dass sie brechen erlaubt.

Print Hinweis: 6 Perimeter; Top und Bottom Schicht auf null setzen. Infill auf 35% oder 40% rechteckiges Muster um ein Gitter im Deckel und im Boden zu erzeugen.

Tagi