Holder for Flocare Infinity feeding pump & bottle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 3D-printed holder is designed to keep a Flocare Infinity feeding pump and a 500 ml container securely in place.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 143
- Wydruki
- 0
- Wyświetlenia
- 1023
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This holder is designed to keep a Flocare Infinity feeding pump and a 500 ml container securely in place—whether you’re on the go or setting up for night feedings. Its compact form allows it to fit inside a small children’s backpack, so your child can move around more freely during feedings. Two holes on the back also let you attach the holder to a bed using a strap for easy overnight use.
- Backpack-Friendly: Slim dimensions so it fits into a children’s backpack, promoting mobility and comfort.
- Easy Bed Mounting: Two holes on the back panel for quick attachment to a bed frame or other supports.
- Dual-Part Assembly: Built from two separate parts that attach securely using three M3x10 screws and nuts.
- Customizable: If the included bottle holder doesn’t fit your bottles or containers, feel free to design your own custom bottle holders and share them as a remix.
Print settings:
- Layer height: 0.12mm for a smooth finish, but thicker layers should work fine too
- Wall loops: 3
- Supports: no supports needed
- Brim: use a brim if you have bad adhesion or warping issues
Note that this accessory is not a medical device; always follow the manufacturer’s instructions when using the pump.