1 / 1
StashBox interior for Dust-safe Parametric Box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Interior for the Dust-safe Parametric Box, suitable for a stashbox.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 371
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple interior for a stashbox that fits perfectly with the Dust-safe Parametric Box.
Interior 1.step:
- Cutout for grinder is 64.3mm diameter
- Cutout for a container: 77mm length, 61mm diameter.
- Cutout for a lighter, 43.7 x 16mm
- Cutout for a 2.5mm diameter “poker” for filling cones. There's a good chance you don't have one that fits. If that's the case, you can import the .step file and change it in Fusion.
Interior 2.step:
- Cutout for the excellent Cone filler by jamedeo: https://makerworld.com/en/models/528409-print-in-place-hinged-cone-filler-king-size#profileId-445502
- Cutout for this small funnel by 3DPrintNinja: https://makerworld.com/en/models/943577-little-funnel#profileId-909711
I'd recommend two drops of glue on the bottom of the box so they can't slide around, but also easy to remove if you want to later. Using both of them, will leave a small gap in between them that you can use to have some empty cones for instance.
I've uploaded .stl files too just to enable Printables's 3d preview, but don't use them. Use the .step files as they print better.