Interactive presentation tray for chocolate Easter eggs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Interactive presentation tray with Easter Bunny that tilts forward when you pull the lever, causing 1 Easter egg.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Spring & Easter
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Interactive presentation tray for chocolate Easter eggs.
It is easy to take a chocolate Easter egg from a large supply, but it is more fun if you have to do something for it.
Place a number of chocolate Easter eggs on the slide and fill the presentation tray with Easter eggs.
Pull the lever so that the Easter Bunny tilts forward and one chocolate Easter egg rolls past the Easter Bunny. That is the Easter egg that can be eaten.
Assembly:
Required tools, tweezers and a tube of precision superglue.
- Clamp the soil in the base cabinet.
- Glue the eggleft and eggright in the recess as in the pictures with the grass detail towards the slide.
- Insert the axis1 a little bit through the hole in eggright.
- Slide 1 axis1washer over the axis1.
- Place the easterbunny in the slot at the bottom of the eggleft and eggright with the tail towards the slide.
- Slide the axis1 a little bit through the hole for axis1 in the easterbunny and place the second axis1washer over the axis1.
- Push the axis1 further through the hole of eggleft.
- Put a small drop of glue on the pin of axis1lid and press it into the hole of axis1.
- Slide the pullpushbar through the hole in the side of the base cabinet with the handle pointing upwards.
- Insert the two axles of the actionbar into the holes of the pullpushbar and the easterbunny to connect the whole thing together with the hook facing the right side.
- Put a drop of glue on both pins of the actionbarlid and press it into the holes of the actionbar.
- Hook a small elastic band onto the hooks on the actionbar and on the right inside of the base cabinet (this is an option, without elastic the easterbunny also tilts back when the pullpushbar is pressed)
- Place the presentation plateau on a flat surface and place the bowl in the designated circle on the soil.
- Fill the slide and the bowl with chocolate easter eggs.
Operation:
Pull the handle of the pullpushbar until the easterbunny is tilted forward and one chocolate easter egg has rolled past the easterbunny.
If an elastic band has been used, the pullpushbar will slide back into the base cabinet and the easterbunny will tilt back to its original position.
If there is no elastic band connected to the pullpush mechanism, push the pullpushbar back in until the original position is reached and the easterbunny is tilted back again.
- Filament: PLA
- Layer thickness: 0.20mm
- Filling: 20%
- Support: none