Oddball from Halo: Combat Evolved (Ingame Replica)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skull from Halo CE touched up for printing. Prints with supports buildplate only. Tested with PLA. This object is 1:1…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- People
- Licencja
- Creative Commons — Attribution
Skull from Halo CE touched up for printing. Prints with supports buildplate only. Tested with PLA.
This object is 1:1 to scale with the object in Halo: CE, you may need to scale to 1:2 or 1:4 to get this to fit on most beds.
Use a gentle pry to remove the supports starting from the rear of the skull and working forward, it should all remove in one piece. Trim the leftover support material with flush cutters (teeth, under jaw)
NOTE: This model is from Halo CE but is also identical to the model in Halo 2 and Halo 3
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Doesn't Matter
Supports:
Yes
0.25mm
Infill:
20%
Category: Scans & Replicas