1 / 3
Magnetic cover for MTR3B Currahee QRP ham radio transceiver — zdjęcie 1
1 / 3

Magnetic cover for MTR3B Currahee QRP ham radio transceiver

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of AB4BA's original MTR3B Currahee ham radio cover. No supports needed.

Ocena
0 / 5
Polubienia
3
Pobrania
27
Wydruki
0
Wyświetlenia
146
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

I reduced the size of the cover's openings from AB4BA's original design so supports are not necessary. The top of the radio is also smooth so it is less likely to get snagged in a carrying bag.

Like AB4BA's original build, I used 6x3mm magnets and black carbon steel #2-56 x 1/4" pan head screws.

Replace the 4 screws on the face of the radio one at a time.

After printing, place one magnet in each hole and press into place.

My original design was smooth, like AB4BA's but because it's completely smooth, orienting the cover when placing it on the radio can have you putting it on backwards. I put some text on the cover to assist with this. Other designs can also be done, so I'm leaving the smooth cover as an option for others to remix.

Tagi