1 / 10
TZ E3 V2 Hotend to Voron Dragonburner adapter (Ender 3 variant of the Bambulab Hotend Derivative!) — zdjęcie 1
1 / 10

TZ E3 V2 Hotend to Voron Dragonburner adapter (Ender 3 variant of the Bambulab Hotend Derivative!)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two modified E3D V6 mounting plates allow you to mount a TZ E3 hotend, the ender3 variant, to the Voron Dragonburner.

Ocena
5 / 5
Polubienia
60
Pobrania
267
Wydruki
0
Wyświetlenia
2195
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These two plates allow you to mount the Ender 3 variant of the TZ hot end to your Voron on a Dragonburner.   This variant of the mount is a through hole design right to the MGN12C.

The front and back brackets you need are included in the obj and 3mf files. They are both scaled to 101.5% for printing in ABS.

The custom mounting bracket for a MGN12C is also included. The back bracket is a direct through mount right to the carriage.  The carriage bolts are 15mm apart and the hot end ender bolt pattern is 14mm, but it works due to the oversized holes in most hot ends and the slots in the adapter.   Even if your hot end has tight holes, the length of the bolt will provide the roughly .2mm of flex for this to work out.   
 

The STEP file contains all parts used to create these adapter plates.

---

Info:

In my opinion, the tool head body should be removable without futzing with the hot end, just like on an Ender3 or CR10.  I always thought the lowly Creality toolhead was far superior to the Afterburner and Stealthburner.  This mount brings you the quality of life one had when working on a Creality toolhead with it's brilliant two bolt hotend mounting.  Everything comes off, and the hotend stays put!  

The TZ hotend flows at least 28mm3/sec as tested on my old CR10 with Hatchbox PETG.  This is not bad at all, especially for only $25.  

If you do end up giving this hotend a try, please consider using my affiliate link, I have many hours into this project and it would help me knock out more it!

This variant uses Bambu style nozzles.  You can also screw in V6 nozzles, they have larger heads.   This is the exact listing I used to purchase the one used for testing.  I have the long nozzle variant also, but I cannot recommend it until it is fully tested.

https://amzn.to/4iahnJH

---

Thank You Said, Cothyh and Keram for the awesome model of this hot end! Without it, it would have been difficult to modify the original Dragonburner STEP files. 

Thank You Chirpy2605 for the awesome and so simple Dragonburner.  I love my Voron, except for the Afterburner and now Stealthburner. They really make using it a chore.  The Dragonburner brings back the fun and simplicity back to 3D printing!!! 

Tagi