Flashforge AD5M Nozzle Wiper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nozzle wiper for the FF AD5M. Uses a BambouLab A1 Mini Nozzle Wiper and attached to the printers bracket.
- Ocena
- 0 / 5
- Polubienia
- 78
- Pobrania
- 214
- Wydruki
- 0
- Wyświetlenia
- 2709
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
A nozzle wiper for the FF AD5M. Uses a BambouLab A1 Mini Nozzle Wiper and attached to the printers bracket.
Print in ABS/ASA, using the orientation provided in the STL.
You need to modify the machine G-Code to actually use the wiper. As a refrence, this is my Machine Start G-Code, please modify it to fit your machine and calibration AND USE AT YOUR OWN RISK!
Main thing to pay attention to is the Z value at the nozzlewipe phase
M190 S[bed_temperature_initial_layer_single]
M104 S[nozzle_temperature_initial_layer]
G90
M83
G1 Z5 F6000
G1 E-0.2 F800
G1 X110 Y-60 F6000
G1 E2 F800
; Nozzlewipe START
G1 Y-80 X110 Z5 F4800
G1 Y-80 X100 Z5 F4800
G1 Y-90 X110 Z5 F4800
G1 Y-100 X100 Z5 F4800
G1 Y-110 X90 Z5 F4800
; Nozzlewipe END
G1 Y-110 X30 Z0.25 F4800
G1 X-80 E8 F2400
G1 Y-109.6 F2400
G1 X30 E5 F2400
G1 Y-110 X30 Z0.45 F4800
G1 X-80 E8 F2400
G1 Y-109.6 F2400
G1 X30 E5 F2400
G92 E0
(The design is ugly, but works. Anyone willing to take a shot at a better design are welcome to use the Onshape files: https://cad.onshape.com/documents/a50735d942012fd8ac09b4d6/w/b90bf9ed97b888264c28c00d/e/c28e691b7225f6f68c930ade)