Dual CFS Stand w/ Bottom Drawer Slides
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dual CFS stand that has a bottom slide out so you can access the bottom CFS easily
- Ocena
- 5 / 5
- Polubienia
- 64
- Pobrania
- 556
- Wydruki
- 4
- Wyświetlenia
- 2984
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A CFS stand with a bottom slide out to access the lower CFS unit easily when needed. ( 10 Print Files Total needed for this print). You will need bolts to attache the plates to the side walls(M4), just screw bolts into the holes, nuts not needed unless you so choose to use them. Print with at least 4 walls and 15% infill for stability. i tried 2 walls and it held just fine, but wasnt as stable as I liked it to be. You ll need a 300 to a 350mm build plate to print these. I printed mine using the K2 PLus and the K1 max creality printers.
UPDATE: Ive uploaded new top and bottom plates that do not requires bolts to hold them together. They are also more durable because they interlock and the split is not all in the middle as the other design is. I reccomend printing the revised top and bottom plates.
If you make mods to this design please share with me! Thanks!