1 / 2
TT02 exhaust nissan350z
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was made for a TT02 with a HPI Nissan 350z bodyshell.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was made for a TT02 with a HPI Nissan 350z bodyshell.
It was made sit on the rear bumper of tt02
As you can see from the image can cut the bodyshell higher if you want more visible.
This was never optimised or made printer friendly. I don't remember how I printed it. It managed to survive until I changed bodyshells with only the bottom smaller exhausts being splintered.
can recommend at least painting it a bit silver.
This was used as a base, so credit where it is due.
https://www.printables.com/model/252117-tt-02-handle