Source Four LED Series 3 Top Hat (7.5in)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits Source Four Lustr 3 LEDs and Source Four Par Fixtures with 7.5 inch accessory slot.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 448
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Top Hat sized for (7.5in) Source Four LED Series 3 and LED ColorSource Par.
Most effective at reducing glare when interior is lined with felt tape.
I recommend using black or matte black PLA/PETG to reduce part finishing. PETG would be better at reducing warping.
WARNING:
Since these light modifiers are 3D Printed, some warping might occur based on heat generated from the fixture. Use at your own risk.
Print Instructions
Print with ‘aligned’ seam position (aligned rear seam is usually best and allows for easy aligning of felt tape on seam) and turn on ‘avoid crossing perimeters’. Prints great on Prusa MK3S/+ 0.30 draft preset, reduce print time with a larger nozzle size.
Happy Printing!