Logitech C270 HD M12 lens cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternative cap for the C270 HD that allows you to mount an M12 lens.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Not so long ago I picked up a Logitech C270 HD on Vinted for 10 euros. When I installed the webcam I found that the default field of view was a bit too narrow.
I still had some M12 webcam lenses lying around from a long time ago when I was modding a PS3Eye for IR-tracking. Beside this I also had a M12 mount that seemed to fit the C270 PCB almost perfectly.
It's a nice mod as now I can choose a lens of my liking: wide-angle, zoom or prime. I also noticed that the image quality is better than with the original lens.
If you don't have the M12 mount, then you can print it yourself as there is a model on thingiverse.
To install the mount, just disassemble the webcam using the three screws. The current lens is mounted on the PCB using two screws in the back. Remove those and install the new mount.
I have foreseen a small gap for the microphone on the top case. In most models this is not foreseen.