Pipe connectors for a blanket fortress for children
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connectors to create a Structure to cover with blankets for children to play in
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Share Alike
Inspiration
This Model was heavily Inspired by : https://www.printables.com/model/349658-pipejoint-for-awesome-blanket-forts
Improvement
But I
Started from scatch
Optimized for printing without overhangs
Decided for sperical balls
Due to my experience with layerlines delaminating, I also created the PipeJoint_round_Screwable_V2 Files. You will need some woodscrews of 30mm length and nominal 4mm diameter. The prepared hole has a diameter of 3.5mm:

--> you can prin this version anyways, it has more crosssection than the version without screws and you can also use the screws once it has broken!
Printing
Save some material if you do not print the whole sphere:
whole: 70 grams
half: 55 grams
8th: 30 grams
Note: if you only print the 8th sphere, there is only a cube shaped object to build
Remix
from provided STEP files