1 / 3
2024 Ford Maverick Adaptive Cruise Control CCM Grill Mount — zdjęcie 1
1 / 3

2024 Ford Maverick Adaptive Cruise Control CCM Grill Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This mount adds the adaptive cruise control CCM (Radar Sensor) to a Ford Maverick Grill without cutting.

Ocena
0 / 5
Polubienia
10
Pobrania
40
Wydruki
0
Wyświetlenia
524
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

This mount is designed to add the front radar sensor (CCM) to a Ford Maverick 2024 and older without the need to cut your grill or remove the front bumper (Running wiring may be easier with the bumper off, but it is possible with the bumper still attached). This mount works by sandwiching between the rear vertical support behind the grill and the grill itself. I modeled this mount from my 2024 Ford Maverick Tremor XLT grill, but it should fit any 2024 and older Maverick XLT (This will not work with an XL grill as the grill shape is different). I have included STL files for all parts, the original Solid Works files, and the scans of the CCM and grill. 

 

You must drill four holes in the rear vertical support behind the grill for the bolts to pass through and attach to the rear plate. 

 

This mount was designed using M5 hardware and heat-set inserts. I recommend printing it with ASA, as it is temperature and UV-resistant. I printed mine with six walls and 75% Gyroid infill. 

 

You will need the following hardware.

 

X11 = M5 x 7MM tall brass heat-set inserts

X4 = M5 X 30MM Button head bolts

X4 = M5 X 40MM Button head bolts

X4 = M5 X 55MM Button head bolts