JSAUX MagSafe Mount for Headboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this specifically to mount on the top of my bedframe headboard, but could be altered to fit other things.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This mount is designed to accept the JSAUX MagSafe charger, pressure fit, so that I could mount it on the top of my bed's headboard. It is a VERY snug fit, probably depending on the printers' specifications, but it took a good amount of force for me to push it in. Once installed the charger should sit flush with the rim so the print should not get in the way of charging.
The mount itself is designed for a headboard that is about 20.5 mm thick, so it likely won't fit others without modification (I think our bedframe was from Ikea) but it should be easy enough to do so.
I believe the JSAUX charger is the same dimensions as the official Apple branded MagSafe charger, but I don't own one so I can't be sure.
All the files are oriented in the best print orientation already, I printed mine in PETG on a carbon fiber textured plate, but I would think PLA or other filament should be fine.