Upgraded replacement elevator motor shaft for JOYIN Marble Run
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My kids broke the shaft that came with their JOYIN Marble Run elevator. I found kennyxxl82's excellent 1:1 model…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
My kids broke the shaft that came with their JOYIN Marble Run elevator. I found kennyxxl82's excellent 1:1 model (https://www.thingiverse.com/thing:6954986) and printed a replacement. It worked well at first but the basic PLA I used as too flimsy and, with minimal resistance, the U-shaped interface to the motor output shaft would flex allowing the motor shaft to spin within the 3D printed extension shaft.
I modified the design to convert the U-shaped interface to a full box increasing the strength. I also added a half-sphere to the smaller disc to reduce the necessary supports when printing.
Print Settings
Printer Brand:
Bambu Lab
Printer:
Bambu P1P
Yes
Supports:
Yes
0.4mm x 0.2mm
Infill:
70
Notes:
I was successful printing with a 2 layer raft, tree supports, and a brim
Category: Toy & Game Accessories