Ender 3 v3 SE Adjustable Blower Fan Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Revision from my popular model to be more versatile with optimized performance.
- Ocena
- 4,8 / 5
- Polubienia
- 30
- Pobrania
- 225
- Wydruki
- 4
- Wyświetlenia
- 1361
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi, guys! Yet another model for Ender 3 v3 SE.
I'm having an issue with my Ender 3 v3 SE again because I've changed the hotend, which decreases the total length of the nozzle slightly. I can't find an adjustable fan shroud that suits my needs, so I decided to do it myself, and here it is.
Material: PETG/ABS/ASA
Orientation & Print Setting: as it is. For print setting, Voron spec will be fine
- Left side → can print on its side without any support required (if your printer is well-tuned for bridging)
- Right side → also on its side, with brim and support, it is recommended for successful printing
Adjustable: up to 8 mm vertically.
Additional Hardware: 2x 5015 blower fan, 2x M3x20mm screw (or longer), 2x heat insert (3x4x5 mm). For mounting reuse the housing screw that came with the machine.
Note: The fan mounting dimensions were based on the GDSTIME 5015 blower fan. If you're using other brands, you might expect some misalignment with the model.
!!Attention!!: Due to technical issues, I have uploaded the wrong model file (for the right fan shroud). If any of you have downloaded it previously, please check back for the new model. Sorry for your inconvenience.
Cheers!!!