1 / 2
Bed Levelling PETG 0.3 test 12 minutes — zdjęcie 1
1 / 2

Bed Levelling PETG 0.3 test 12 minutes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

There are Many of these but ive customised this one to test at my 99% of the time print settingsAs I always print in…

Ocena
0 / 5
Polubienia
0
Pobrania
79
Wydruki
0
Wyświetlenia
154
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution — Noncommercial

There are Many of these but ive customised this one to test at my 99% of the time print settings

As I always print in PETG at 0.3 I wanted to make a quick level print test so when ive levelled my dual Z steppers i can see quickly that all is good to go!

PETG 230'c 80'c 40mm 0.3 15mins

with a skirt it covers a large bed plate test

Category: 3D Printing Tests

Tagi