Vax Airstretch Attachment Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vax Airstretch Attachment holderIve designed an attachment holder that clips onto the fixed rigid upright pipe on the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Vax Airstretch Attachment holder
Ive designed an attachment holder that clips onto the fixed rigid upright pipe on the back of the Vacuum and then stops the attachment getting misplaced and lost (By my Mrs!!)
I have included a model thats designed by somebody else that fits this Vax model (31.5mm) thanks BC3ds https://www.thingiverse.com/thing:5234934/files
Also my recent redesigned 31.5mm nozzle https://www.thingiverse.com/thing:5422026
The 3 placement rings are specific to each fitting as they are all slightly different inner diameter, as placed in the demo, the spare is for the single multi attachment you get with the vacuum.
PETG 230'c 80'c 40mm 50% infill for some strength but flexibility, could do 100% but will increase print time 3.5 hrs print
Category: Household