Lid for a 1.25l Rubbermaid square Container Nr. 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We have several quite old Rubbermaid containers. when counting, I noticed that one of the lids was missing.Having more…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We have several quite old Rubbermaid containers. when counting, I noticed that one of the lids was missing. Having more boxes than lids is not a good thing, so --
- search the net, if rubbermaid still makes them? No.
- search the net, if anybody else published a model of the lid? No.
- FreeCAD Extrude Sketch along Path? Yeah.
The container is a square with rounded corners, and slightly outward bent sides. It bears the Rubbermaid logo, the inscription "1.25L" and in small print "0012 ID" The original lid has a fairly large number 2 in a square on its inside, and other branding or marking.
My lid is a bit thicker than the original one, and snaps more tightly onto the box, the originals are not really water-tight. Maybe they were when they were new...
Printed with TPU - no infill, everything is perimeters. The lid is designed to be printed upside down. This way only the brim of the lid needs some minimal support.
Category: Replacement Parts