1 / 2
Verstärkung für Kopfhörerbügel reinforcement for AKG 540 Headband — zdjęcie 1
1 / 2

Verstärkung für Kopfhörerbügel reinforcement for AKG 540 Headband

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wenn der Bügel zerbrochen ist, einfach das Teil ausdrucken und drauf stecken.Falls bei euch eine andere Stelle defekt,…

Ocena
0 / 5
Polubienia
2
Pobrania
6
Wydruki
0
Wyświetlenia
46
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

Wenn der Bügel zerbrochen ist, einfach das Teil ausdrucken und drauf stecken. Falls bei euch eine andere Stelle defekt, ist müssst ihr das Bauteil spiegeln. Die Bügel sind nicht überall gleich dick.

mfg

If the bracket is broken, simply print out the part and put it on. If another location is defective, you have to mirror the component. The temples are not the same thickness everywhere.

Kind regards

Print Settings

Printer Brand:

Prusa

Printer:

Prusa Mk1

**Rafts:**

Doesn't Matter

Supports:

Doesn't Matter

**Resolution:**

Nozzle 0.4mm Layerhight 0,15mm

Infill:

100

Category: 3D Printing

Tagi