Alien Wall Light Mounting for Three Standard LED Light Fittings (55-68mm Slim Type)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall light designed to mount 3x Slim LED light fittings in a striking pattern
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Standard Digital File License
This is a wall light designed to mount 3x Slim LED light fitting of the 55-68mm Hole Type (example https://www.ebay.co.uk/itm/335049402610) in a striking way.
It consists for three STLs, a Back Plate, Light Body and a Locking Ring
Print one each of the Back Plate, Light Body and three of the Locking Rings, use supports on the Back Plate and Light Body but not on the Locking Rings.
Take the spring clips off your three LED lights and then use the locking rings to screw into the light body behind each of the lights and secure them into the body.
Mount the back plate onto the wall using 4 screws, then wire up the three lights.
Put the slot in the light body over the hook in the backing ring and then close.
Finally use a single 5mm hex head bolt or a screw to secure the body onto the backing plate as shown.
I used ASA for UV resistance