Filament Clip für Original Prusa Spulen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Der Clip liegt komplett flach auf dem Druckbett und hat eine noch bessere Haftung als das Original.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 137
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Dies ist ein Remix und der Clip wurde so bearbeitet, dass er flach aufliegt und noch besser auf dem Druckbett haftet.
Empfohlene Druckeinstellungen:
2 Ränder/Wände
4 Lagen unten/5 Lagen oben
15% Füllung 0.2mm Lagenhöhe
Wandgenerator: Adaptiv Kubisch
Ich habe den Clip wie oben mit den empfohlenen Druckeinstellungen und der Prusa Core One Standardeinstellung (HF0.4 Nozzle und 0.2mm STRUCTUAL) gedruckt.
This is a remix and the clip has been edited so that it lies flat and adheres even better to the print bed.
Recommended print settings:
2 edges/walls
4 layers bottom/5 layers top
15% infill 0.2mm layer height
Wall generator: Adaptive Cubic
I printed the clip as above with the recommended print settings and the Prusa Core One default setting (HF0.4 Nozzle and 0.2mm STRUCTUAL).