Laser Baseplate for Revo7 for mounting Fenris Laser (downward sloped)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
! Gogun item ! Laser Baseplate for Revo7 crossbow side mount for Fenris laser. Sloped downward to compensate arrow drop.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 1
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Laser Baseplate for Revo7 crossbow side mount to mount Fenris Laser Module. You might try to fit it to a Revo12, but there is no function guarantee.
Replaces one side picatinny rail.
The inner holes are for insertion of 8mm M4 screw inserts for 3dprint brass thread inserts (e.g. ruthex). Insert the thread inserts with soldering iron at about 240° when usind ASA. Then screw Fenris Laser Mount on it and enjoy Fenris Laser adjustability with Revo7/12.
Maybe you have to increase the wall line count in the slicer settings for the thread inserts.
The longer distance outer to inner holes are for the curvyer side of the Laser Mount.
Link to thread insert: https://www.ruthex.de/products/ruthex-gewindeeinsatz-m4-50-stuck-rx-m4x8-1-messing-gewindebuchsen.
Sloped downward to compensate for arrow drop.