"Oops, all nuts!" pencil organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organize your pens & pencils with this stack of functional M80 nuts.
- Ocena
- 5 / 5
- Polubienia
- 145
- Pobrania
- 511
- Wydruki
- 8
- Wyświetlenia
- 2333
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
I'm building on my nut & bolt pencil organizer by making a version that's all nuts. It's also fully compatible with that organizer (see the third picture): an M80 screw size, with 0.5 mm tolerances.
Interior dimensions: 75mm (diameter) x 102mm (height)
External dimensions: (WxDxH): 115mm x 115mm x 105mm
Mine is printed with Prusament mango yellow, Polymaker white, and Overture digital blue PETG filament, but any filament type should work perfectly fine for this model.
Printing instructions
You can print this all in one color, but it's more fun to print with color changes to get three different-colored nuts. If you use the included 3MF file, it's already set up with manual color changes (M600).
If you want to do this manually within your slicer, set up color changes at the first layer above these heights:
- 35 mm
- 70 mm