Vernier Calliper Gridfinity Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Should fit most callipers, but for reference mine are Moore and Wright 110-15DBL
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Vernier Callipers, Gridfinity bin
These should fit most callipers but for reference mine are: Moore & Wright 110-15DBL
There are loads of bins for callipers. Unfortunately none of them were suitable for my bin, so I made my own.
These have some extra space for some radius gauges (gauges by LinkDesigns: model here). Although you can fill them in using PrusaSlicer, or hollow out a bigger hole if you need something else here.
The bin is stackable even when the callipers sit inside.
Gridfinity parameters (x,y,z): 6u x 2u x 4u
I printed this on the Prusa MK3S so the model was split in half and joined with dowels. Other than that there are no specific print parameters. Use whatever infill and material you like.