Renault Captur (2014) Mio MiVue mirror holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Renault Captur interior mirror holder for Mio MiVue
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 744
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
EDIT: added Ball_v3, MiVue uni holder, MiVue C380D and 752D holders with lock mechanism
Ball_v3 has 6 holes around and 1 hole in the centre to release pressure when gluing together with holder
Print with ASA or ABS (high temperatures behind the car front glass). PETG sometimes also might work.
Use at least 25% “honeycomb infill” (more is better for small parts), 6 perimeters.
All should be printed oriented as is (use auto-orientation) for max strength.
Use “tree-hybrid” supports under arm only (block supporting holes - made to be printable).
If is little bit loose after tightening screws, add rubber on one inner hole side (ex. piece of old tire tube)