Spy_X_Family_Yor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do you like the animation models and posters? I'm learning to make these, please provide your feedback or like if you do
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Project: Yor.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 250x146mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.3mm and the Actual Depth is 2.3mm
Filaments Used:
PLA 3DHoJor Black Transmission Distance: 0.1
PLA BambuLab Basic Orange Transmission Distance: 7
PLA Sunlu White Transmission Distance: 5.9
PLA Sunlu Yellow Transmission Distance: 6
PLA Sunlu Red Transmission Distance: 4.1
This print uses 5 unique filaments, other brands of filaments with similar TD would work as well.
Swap Instructions:
Start with Black (Slot1)
At layer #6 (0.56mm) swap to Orange (Slot2)
At layer #12 (1.04mm) swap to White (Slot3)
At layer #15 (1.28mm) swap to Yellow(Slot4)
Slot1: swap to red anytime btw layer 6 and layer 15
At layer #16 (1.36mm) swap to Red (Slot1)
At layer #21 (1.76mm) swap to White (Slot3) for the rest