GSG 1911-22 Extended Magazine Bases

I decided to design extended mag bases for the GSG 1911-22 like I did for the Ruger MKII  / MKIII and MKIV 22/45 pistols.  I ended up making 5 different designs, because hey, everyone loves choices!  I figured, since I designed them, might as well post them.

Type A - This is the first one I designed.  The padded portion of the baseplate extends straight away from the bottom of the mag, and does not have the 9deg angle the mag does.  It has a 0.03" fillet around the bottom. It looks blocky, and I was not a fan of this one.

Type B - I left the lip protruding from the front of the grip so you still have something to grab if you need to really pull on the bag to get it out, but then I recessed the pad to the internal mag dimensions, and had it angled 9deg, paralleling the mag body.

Type C - This is pretty much the same as Type A, except the pad angles the 9 degrees to parallel the magazine angle.  I think it looks better than Type A, but it is still a bit sharp around the bottom corners.

Type D - This is the same as Type C, except I put 0.10" fillets around the bottom and back side.  the fillet on the back side is actually a variable fillet, going from 0.10" at the bottom to 0.030" where it meets the magazine body.

Type E - This one has the lip protruding from the front of the grip, but then tapers back at a 45deg angle.  I only made a 0.30" version of this one, because anything less, and the angled cut on the front is not really noticeable.   If someone wants more of this one, let me know and I can make them and get them posted.