1 / 5
Bonecharm (from dishonored)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Its a model of a bonecharm from dishonored, no supports, multiple parts
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 75
- Wydruki
- 1
- Wyświetlenia
- 367
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (20)Powiązane
INSTRUCTIONS:
- YOU NEED A CERTAIN NUMBER OF EACH MODEL, IT HAS A NUMBER IN ITS NAME EG. 2X_Bonecharm_keychain_ring = PRINT 2 INSTANCES
- IF THE STL FILES DO NOT HAVE A FULL BRIM, SINK THEM A FEW mm UNDER THE PRINTBED
ASSEMBLY.
- GLUE 2 PARTS OF Bonecharm_keychain_ring UNTIL THE GLUE HARDENS
- PUT THEM INTO THE SPOT ON THE Bonecharm_ring WHICH HAS A LITTLE GROOVE FOR IT
- GLUE THE SECOND PART OF Bonecharm_ring ON TOP
- ADD Bonecharm_cogwheel + Bonecharm_bone_hold
- FINALLY GLUE Bonecharm_bone INTO THE Bonecharm_bone_hold
Its easy if you’re not completely stupid, hope you like the model.
You can print it in multiple colors like I did
Also if you want to wear it as a keychain, make it significantly smaller than my comically large instance (I know size is just a number but this makes it really annoying to wear(I don’t))