Ender 3 Pro - Direct Drive - Big Tree Tech Smart Filament Sensor V2 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a place close to the extruder to mount by BTT SFS v2 to take advantage of the filament motion detection.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In order to take advantage of the BTT SFS v2 filament motion sensing, I created this mount that attaches around the extruder stepper motor and clamps with a screw and nut.
With this setup, I am able to set the filament detection to 3.5 mm without issues and false alarms. When mounting the sensor further away from the extruder, I had to leave the detection set much higher, which wasn't as advantageous in helping to catch clogs or other filament issues early.
Other considerations are to use a reverse bowden from the the extruder to the filament sensor, but I preferred this method of attachment.