QiDi Plus 4 120mm Noctua Exhaust Fan Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Converts your printer to use a larger fan. Case modification required.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 108
- Wydruki
- 2
- Wyświetlenia
- 1180
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This adapter is made to fit QiDi Plus 4 exhaust fan port and allow for a larger 120mm fan to be used. The specific dimensions are to fit the Noctua fan with the tolerances for a friction fit where the rubber corner bumpers hold the fan in place and squeeze it between the case and the adapter.
The fan adapter is made with extra long standoffs to re-use existing 4 screws that secure small fan but it requires 4 M4 screws and 4 brass inserts for M4 screws to secure everything together once you re-assemble the back of the printer.
I included a stencil for enlarging the hole in your printer case. To do so you must install the adapter, insert a marking material to the screw holes, and push the cover into it to get the marks for the location of the holes on the back of your cover. Drill the holes out and temporarily secure the stencil to the printer back case. Use a Dremel or similar to take out the extra material and enlarge the hole.
After all that is done discard the stencil, assemble the case and install the custom fan cover. This custom cover is a modification of an existing printables model that I used for the mainboard 120mm fan.
If you have a poop shoot/bin on the back of this printer you may want to check the fitment as it may interfere with this setup.
I used the Noctua NF-F12 industrialPPC-24V-2000. Its 2000rpm is adequate for the air pressure & flow but if you want more there is a 3000rpm version of it.
I used a PA-CF filament for this model but you can use anything that is temp resistant.
This model will not work well with other fans without adjusting the size of the model.
No supports needed to print the adapter.
Things you'll need: