1 / 3
Pi-Clasp locking strap system for vambraces (WIP)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
just a printable sliding clasp mechanism for gauntlets to serve as an alternative to hinge/pin method
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Build Instructions:
(underscore indicates Chiral variable Stand-in, lowercase letter indicates segment)
- Use CA glue to glue part #3 to part #2_b
- Dry assemble parts #1_ and #2_a and #4 with part #2_a gripping part #1_ and resting on top of part #4
- Spread CA glue on exposed section of part #3 and line up the edges of parts #2_a and #2_b so that part #3 is now being glued to part #2_a
- Compress all parts between fingers
- Attach assembly minus part #4 to the inside of gauntlet using CA glue
- Lock part #4 into assembly and glue the other end of part #4 to the inside of the opposing shell WHILE locked in place
This model has a paid version available at https://cults3d.com/en/3d-model/various/pi-clasp-support-page for 1€ ONLY for if you like what I've done and you'd like to support me. This model is intended to be and ALWAYS will be free to those who want it