1 / 7
Filament-Wiper_PC4-M6 with Anti-Squeakz
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament-Wiper_PC4-M6 with Anti-Squeakz
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 435
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (15)Powiązane
I never thought that a wiper/cleaner is needed if the filament is in a dry box, and the path to the extruder is fully protected with PTFE tube. . . . until I noticed some hairs caught between the filament coils and dust on a freshly opened Polymaker spool of PETG.
Small Filament-Wiper with thread for PC4-M6.
Update-1: Filament-Wiper_PC4-M6 with Anti-Squeakz
Added inset to prevent filament squeak and squeeze as it forces the foam into the cone