Remixed Temperature Tower for Elegoo Neptune 4

Extruder Nozzle : 0.4mm
Layer Height : 0.3mm
First Layer Height : 0.35mm
Top and Bottom Solid Layers set at 3
Seam Position : Aligned
Seam Gap Distance : 15%
Scarf Joint Placement : Nowhere
Perimeter Generator : Arachne
Fuzzy Skin : None
Infill : 20% Honeycomb
Brim : 4mm Outer Only
Support Material : off
Speeds
Perimeters : 60mm/s
Small Perimeters : 15mm/s
External Perimeters : 50%
Infill : 80mm/s
Solid Infill : 20mm/s
Top Solid Infill : 20mm/s
Bridges : 60mm/s
Gap Fill : 20mm/s
Travel : 130mm/s
First Layer and First Layer Solid Infill : 30mm/s
Max Print Speed : 80mm/s

Filament is CC3D (www.CC3Dchina.com) from amazon, Black 1,75 with slightly altered settings

Company Recommended filament settings:
Brand:CC3D
Material:ABS
Filament Diameter:1.75mm
N.W:1KG
Color:Black
Printing Temperature:240-250°C
Print speed：30~50mm/s
Empty speed：40~80mm/s
The bottom should be heated to 90-100

My custom filament settings for this filament
Idle Extruder Temp: 180degC
First Layer : Extruder 240degC Bed 100degC
Subsequent layers : Extruder 235degC Bed 95degC
Extrusion Multiplier : 1

ON THIS MODEL-First layer Temps for model Bed : 100c, Extruder : 245c for adhesion
Subsequent layers at bed temp of 95c
Extrusion Multiplier : 1
for this model, temps are set to 220c, 225c, 230c, 235c, 240c, 245c, 250c, 255c for each level of the test tower.
model is printed Cold to HOT.

Custom PrusaSlicer Start gcode used to print wipe line on ELEGOO Neptune 4

;PRE-PRINT FILAMENT WIPE GCODE FOR ELEGOO NEPTUNE 4 PRINTER
M220 S100 ;SET FEED SPEED TO 100%

M221 S94 ;SET PRINT TRAFFIC PERCENTAGE TO 94%

M104 S140 ;EXTRUDER STANDBY TEMPRETURE SET TO 140degC

M190 S60 ; BED STANDBY TEMPERATURE SET TO 60degC
G90 ;USE ABSOLUTE COORDINATES

G28 ;ALL AXES HOME
G1 Z10 F300 ;LIFT EXTRUDER TO MOVE
G1 X67.5 Y0 F6000 ;MOVE TO START OF WIPE LINE
G1 Z0.4 F300 ;LOWER EXTRUDER TO PRINT HEIGHT

M109 S220 ;SET EXTRUDER PRINT TEMPERATURE AND DWELL UNTIL REACHED, BASED ON PLA FILAMENT TEMP, MAY NEED TO CHANGE FOR OTHER FILAMENTS

G92 E0 ;RESET EXTRUDER

G1 X67.5 Y0 Z0.4 F300 ;MOVE EXTRUDER TO START OF WIPE LINE AND HEIGHT

G1 X167.5 E30 F400 ;PRINT WIPE LINE

G1 Z0.6 F120.0 ;MOVE TO SIDE A SMALL BIT TO CLEAR WIPE LINE
G1 X162.5 F3000 ; QUICK JERK MOVEMENT TO RELEASE ANY STRINGY STUFF
G92 E0 ;RESET THE EXTRUDER

G92 E0 ;RESET EXTRUDER

G92 E0 ;RESET EXTRUDER

DO NOT INCLUDE DASHED LINES

Bed shape set : rectangular
Size : X255 Y255
Origin : X0 Y0
Z-offset : 0

Gcode Flavour : Klipper

Enable Variable layer height feature

I will be adding more g code for other filament materials and such going forward

Print Settings

• Printer brand:

ELEGOO

• Printer:

ELEGOO NEPTUNE 4

• Rafts:

No

• Supports:

No

• Resolution:

0.2

• Infill:

20

• Filament material:

ABS

• Filament brand:

CC3D

• Filament color:

BLACK