1 / 5
Stand for Skyrim Dragon Priest Wooden Mask — zdjęcie 1
1 / 5

Stand for Skyrim Dragon Priest Wooden Mask

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a stand for the fabulous “Skyrim Dragon Priest Wooden Mask”, which I designed especially for it.

Ocena
5 / 5
Polubienia
26
Pobrania
101
Wydruki
1
Wyświetlenia
747
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Masks
Licencja
Creative Commons — Attribution — Noncommercial

I have designed a special stand for the “Skyrim Dragon Priest Wooden Mask” in different variations.

Here is the link to the model from Garyu:

https://www.printables.com/model/680264-skyrim-dragon-priest-wooden-mask

Thank you very much!

 

I created the holder especially for the mask, which is held really well and even snaps into the correct place when inserted.

 

 

 

The different versions:

 

There is a version that can be printed in one piece, either in one color or with a multi-material system.

In the versions with separate parts, the larger part is intended as a single part for the center and the smaller ones in two different versions (recessed and protruding) for the sides. All separate parts should be glued in place with a drop of superglue or PLA glue.

One piece version:

 

cutout for siedes

 

only cutout for middle

cutout for all symbols

 

Here are pictures of the recessed and raised versions of the smaller symbols:

 

Printing instructions:
Printed in PLA (standard structural 0.2mm profile)
2 walls
10% infill (rectilinear)
4 bottom layers
5 top layers
No supports are needed

 

If you have any questions, please feel free to contact me or leave a comment, otherwise I would love to see your photos of your make and please leave a rating =)

Happy printing =)

 

Tagi